von Franz » Sa 6. Feb 2016, 05:39
Das ging aber schnell, Stepen Taylor hat geantwortet:
I borrowed two sets of original weights. Molds were made of the best set in silicone. Resin was then used to make a replica (pattern). The resin was inserted into a sand, mixed with a binder. Hot lead was poured into the sand mold. Brass fittings were inserted before the lead was poured. After the lead was poured, the ‘wing’ were cut off like some early ones.
Weiter oben ist also zu sehen, wie von dem Original eine Silikonform abgenommen wurde. Aus Gießharz wurde darin ein Positiv gegossen. Mit diesem wurde die Sandform für den Bleiguß hergestellt.